ConTroll Quickshifter Kit to suit Yamaha MT-09/FZ-09 (13-16)
ConTroll Quick Shifter kit to suit the Yamaha MT-09 motorcycles.
On ECU Flashed bikes, this Quickshifter plugs into the Tip Over Switch to allow full throttle, clutchless upshifts. A fraction of the price of other Quickshifters, this model is designed for those on a budget, but still want the race bike feel and performance. The shifter is full plug and play, with no splicing or soldering required. Note that this purchase includes the Quickshifter Harness, so no need to purchase that separately. The ConTroll Sensor and shift rod are included in the kit, as well as the harness for Kevin Hope Flashed bikes.
NOTE: This option will only work if you have the Kevin Hope ECU Flash (from Australia) and it uses the Tip Over Sensor connection for the quickshifter action. This is generally available on 2013 to 2015 model bikes.
On 2013-2016 Bikes equipped with a Dynojet Power Commander 5, this shifter plugs directly into the Power Commander Module. Note that you will need to activate the Quickshifter funciton in the Power Commander Software. Then it is ready to use.
Confirm total measurements for your application:
Male Left and Right hand threads to screw into your existing rose joints on the bike
Total length of rod is 200mm to 220mm including male threads.
Comes with lock nuts
For bikes that have non-standard rearsets, please confirm measurements.
This shifter will work as a direct plug and play on bikes with the ECU flashed and the Quick Shifter option enabled.